「アレクサ」タグアーカイブ

スマートホームに向けて36a:各部屋センサーのユニット化

環境センサー72時間稼働させてすこぶる問題ない
そこで、実機の状況を確認した

IMG_20190804_132953

There are no problems with operating the environmental sensor for 72 hours
So we confirmed the situation of the actual machine

すべてにおいてこの温度から上がることはなかった。
問題なのは、非常に高温になった場合の安全確保である。
評価ユニットであるため、信頼性の確保を優先。
問題なし。
IMG_20190804_133216
Nothing went up from this temperature at all.
The problem is to ensure safety in the event of very high temperatures.
As it is an evaluation unit, priority is given to securing reliability.
no problem.

これで、
環境センサーのユニット化を実現できる。

with this,
It can realize unitization of environmental sensors.

まず購入すべきは、AC-DCモジュールユニット
通常スマートホンのアダプタや百均で購入できるアダプタでも良いが、
問題は、持続した構造になっているかどうか
今までを見るからに、結構無理を生じさせる構成のような?
なので、今回はスペースよりも安全性で
このモジュール
見たらわかるけど、ポリスイッチ搭載型
温度による物理スイッチなので、正確に切れます。
自作には、必ずつけました。
ESPは基本的に80-100mA程度あればよいはずなので、十分です。
月の電気料金は、0.14円ですね。

AC-DC module unit should be purchased first
Normally, you may use a smartphone adapter or an adapter that can be purchased on a pay-as-you-go basis.
The question is whether it has a sustained structure
In from view until now, such as the configuration to produce a pretty unreasonable?
So it’s safer than space this time
This module
You can see if you look at it, but with a poly switch
As it is a physical switch by temperature, it cuts off correctly.
To homebrew, we put always.
Basically, it should be around 80-100 mA for ESP, so it’s enough.

あとは、ESPモジュールと環境センサーモジュール
部屋の数、計測したい箇所数分

SnapCrab_NoName_2019-8-4_2-25-44_No-00

After, ESP module and environmental sensor module
Number of rooms, minutes to measure

これだけ多量なので、ルータの貧弱DHCPは使ってはいけないだろう。
Because this is a lot, you should not use poor DHCP on your router.

続きを読む スマートホームに向けて36a:各部屋センサーのユニット化

スマートホームに向けて36:ESPで各部屋環境センサーの起動成功

ようやくモジュールが届いたのでやってみたかった各部屋環境センサー
なんじゃそれ?
最近、熱帯夜の続く日もあり、どこが一番熱い部屋かな?
と思っていた。
ESPでSDカードとディスプレイで、BME280モジュールで各部屋の数値を調べた
非常に効率が悪い。
ん?
WIFIができるならとサーバを起動すると安易に起動できたので、ESPとモジュールを
20セット分購入!
セットにすると非常に安く入るところがあった
各部屋で稼働させて、その数値をクラウド上のログファイルに格納!
それから、ヘアのスクリプトゴリゴリして
部屋の間取り(仮)で表示すると面白かった。

SnapCrab_NoName_2019-8-4_2-25-44_No-00

Each room environment sensor that I wanted to do because the module finally arrived
What the hell is that?
Recently, there has been a tropical night, so where is the hottest room?
I thought.
We checked the figures of each room with BME 280 module with SD card and display with ESP
Very inefficient.
Hmm?
If I could do WIFI, I could start it easily by starting the server.
ESP and modules
Buy 20 sets!
There was a place to go very cheap when set
Run each room and store the numbers in the log file on the cloud!
Then the script in the room
It was interesting when I displayed it by room plan (temporary) of the room.

いろいろな事ができることが分かった。
各部屋の環境センサーで湿度や温度調整が、IFTTTを利用して
管理できることを発見。!
火事の監視もできるし、赤ちゃんなども、不快にならないように
設定もできるのだ。
オートエアコン並みの制御できるでー

It turned out that I could do various things.
Humidity and temperature control with environmental sensors in each room, using IFTTT
Discovered that can be managed. !
It can also monitor the fire, as well, such as a baby, so as not to discomfort
You can also set it.
It can be controlled like auto air conditioner

続きを読む スマートホームに向けて36:ESPで各部屋環境センサーの起動成功

スマートホームに向けて32:物理スイッチのスマート化を自作?

自作スマートホームver0だと、
市販でスマートホームver1.0
もうこれは、戻れない状態  物理スイッチを考察して ようやくモジュールが海外から到着。
貧乏人は、本当に苦労する。
育児を離れても、結局、介護だ、仕事だと休まらない
市販のスマートホームは、本当に便利だ
構築して稼働まで1週間もかからなかった。

スマート家電コントローラでOK
01

02

19rk21
That’s enough.

通常の選択だと、これだ!

しかしである
これを可動させるのは、このまたまたまじかよ
スイッチボットハブプラスという何とも
ショックな製品が必要となる。

 

セサミと同様って事で
続きを読む スマートホームに向けて32:物理スイッチのスマート化を自作?