「cloudcompare」カテゴリーアーカイブ

cloudcompare:標高調整ってどうやるの?

点群の標高調整

初めのこれ!
ここでも、標高の変更はできるのだが基本的には、
Adjustment of elevation of point cloud

This is the beginning!
Again, although altitude can be changed, basically,

02
見ての通り
127.521999が点群の生情報
96.011999が、与えた移動量の換算

As you can see
127.521999 is raw information of the point group
96.011999 converts the transfer amount given

03

便利です。ローカル座標と空間座標を同時に持つことができるようです。

このままでは、他で利用できないので、変換する必要があるので

そこで、ようやくわかったのが、
Convenient.
It seems to be able to have local coordinates and spatial coordinates at the same time.

As it is, as it can not be used elsewhere, it is necessary to convert it

Therefore, the was finally found,
“Edit-Apply transformation”

AxisとEulerがあるけれど
Rotatin を用いると重心からの回転となるので利用できないので
Axis 位置方向のみ移動
Axis Translationだと思う
ちなみに、Eulerは3Dの物体のような物を想定
概要はこれ

Although I have Axis and Euler
Since Rotatin can not be used because it rotates from the center of gravity when using Rotatin
Move only Axis position direction
I think that it is Axis Translation
By the way, Euler assumes things like 3D objects
An overview is this

Axis
https://en.wikipedia.org/wiki/Axis%E2%80%93angle_representation
Euler
https://en.wikipedia.org/wiki/Euler_angles

01

これでOKすると
When this is OK
04

点群の標高が変更されます。
今回のような地形を扱うなら非常に便利っす
The elevation of the point cloud will be changed.
Very handy if dealing with terrain like this time

cloudcompare:見ていたら2.10.alphaがでていますね。

2.9は、ベータ取れて、 (2.9.1 Omnia)です。
とりあえず、自動実行されないように、7z形式で
通常版
http://danielgm.net/cc/release/CloudCompare_v2.9.1_bin_x64.7z
ステレオ版 NVidia 3D Vision and Oculus Riftで利用できる
http://danielgm.net/cc/release/CloudCompareStereo_v2.9.1_bin_x64.7z

DXFのエクスポートのバグが取れているようですね。
2.10は、アルファ版ですが、
http://danielgm.net/cc/release/CloudCompare_v2.10.alpha_bin_x64.7z

cloudcompare:最新版がついに公開。

2.8のベータ版が取れたようです。
2.8は、その名も Hogfather
qVirtualBroom , qCSF , qHoughNormals , M3C2が加わり優れています。
ただし、古いIntel マルチコンパチグラフィックとATIグラフィックカードはサポートされていない.
CPUとグラフィックの intel HD系は動作しているかな?

こちら
www.cloudcompare.org/release/notes/20161218/index.html

このソフトに協力されている方に感謝が述べられています。
以下 とりあえず自分的にこんな感じだろう寄付するために読んで見ました。
※この手のソフトを購入すると数百万はしますし、だからといって市場規模で言うと日本では、育たないでしょうね。だから継続してもらわなきゃなと思って、paypalは持っているので、ポチッとしようかな。

Your support is really appreciated. から
あなたのサポートは本当に感謝しています。
CloudCompareをダウンロードして使用することは自由かつ無料で行うことができますが、CloudCompareはそれ以降も開発し維持することは続きます。
このようなプロジェクトは、オープンソースプロジェクトであり、コミュニティからの積極的な支援がなければ生きつづけることも、存在することもできません。
支援は、問題点レス以外に、今現在、cloudcompareを利用しているユーザが、何千人の利用を考慮すると、1人のユーザーあたりわずか数ドルで大きな差が出て来るのです。
例えば、日々の生活に余剰となるような食事や燃料の数リットル、あなたの健康に悪いことを、このようなプロジェクトに向けて頂くことによって、あなたが求めているCloudCompareの悩みやCloudCompareを利用する数千人のユーザの為に簡単に克服する事が出来ます。

最後に、貢献されたいる方々、新機能の一部を調達した企業や研究所に感謝します。

本文

Your support is really appreciated.

I’d like to take this opportunity to remind our users that contrarily to what I often hear, CloudCompare is not “free”. It’s true that downloading and using CloudCompare can be done freely and free of charge… but developping and maintaining it: certainly not! Open source projects can’t live without active support from the community. And considering that CC has thousands of users, only a few bucks per user would make a huge difference (and I really mean only a few bucks: less than a packet of cigarettes, a pinte, a burger, a gallon of gasoline, or any other thing that is bad for your health and that you could easily skip if you – or your employer – have a really tight budget ;).

And last but not least, many thanks to the contributors and to the companies and laboratories who have financed some of the new features.

ここまでです。

こちらが、寄付のサイトURLです。

https://pledgie.com/campaigns/19052

paypal で払えるようだけど、paypalも企業向けと個人向けあるが今回のpledgie.comは問題なく利用できました。
非常に少ないけど、
20161219_184636_-00
健康と言っても、タバコは臭うので吸わないし、とりあえずってことで。
Even if we say health, smoking smells so we do not smoke
By me anyway.