和室に最適だと思って購入、スマートホーム化できたたが、リモコンフォルダーも必要で作成。
和室の高さが、低く、色調を考察してこれを購入!
スマートホホーム化できたが、そもそも和室であったため、家族からクレーム
仕方ないので、リモコンホルダーを作成!
|
|
|
|
仕方ないので、リモコンホルダーを作成!
続きを読む Ender-3d:和室に最適だと思って購入、スマートホーム化できたたが、リモコンフォルダーも必要で作成。
和室に最適だと思って購入、スマートホーム化できたたが、リモコンフォルダーも必要で作成。
和室の高さが、低く、色調を考察してこれを購入!
スマートホホーム化できたが、そもそも和室であったため、家族からクレーム
仕方ないので、リモコンホルダーを作成!
|
|
|
|
仕方ないので、リモコンホルダーを作成!
続きを読む Ender-3d:和室に最適だと思って購入、スマートホーム化できたたが、リモコンフォルダーも必要で作成。
ワイヤースプレーハンガーホルダーの作成
キッチンには、除菌・アルコールスプレーを常備しているが
置く場所に非常に困ったと妻が言う。
|
|
|
|
|
|
|
|
片手で取り外し、使用後も何も考えずに元に戻すことを
考えた。
持ちやすさは良いが、使う場合の頻度を考えれば、ハンガー
のように、ぶら下げる方がよい。
形状に左右されず、最小限の場所占用を考慮。
過重と誤噴射等を考えた形状とした。
初版は、ワイヤーハンガーの部分が、薄く、破損しやすく、雑だった。
そこで、ワイヤーキッチンハンガーの土台で見直した。
ワイヤーホルダーが非常に雑だったので見直し。
過重があるので、スリムだとぶれる、そこで、若干厚さを変更





Kitchen Spray holder02.stl
https://www.thingiverse.com/thing:4775060
Creating a wire spray hanger holder
The kitchen is always equipped with disinfectant and alcohol spray.
Her wife says she was very confused about where to put it.
Remove it with one hand and put it back without thinking after use
Thought.
It’s easy to hold, but considering the frequency of use, it’s a hanger.
It is better to hang it like this.
Considering the minimum space occupancy regardless of the shape.
The shape was designed in consideration of overweight and erroneous injection.
In the first edition, the wire hanger part was thin, easily damaged, and rough.
Therefore, I reviewed it with the base of the wire kitchen hanger.
The wire holder was very rough, so I reviewed it.
Because there is overload, it will shake if it is slim, so change the thickness slightly
ワイヤーキッチンハンガースリムの作成
過重を考慮した形状に作成したが、どうも大きすぎ!
(^^>
そこで、重さや頻度を考慮して、厚さ、形状を工夫した。
Creating a wire kitchen hanger slim
I made it in a shape that takes into account the overload, but it’s too big!
(^^>
Therefore, the thickness and shape were devised in consideration of the weight and frequency.




wire_Kitchen_hanger_slim.stl
https://www.thingiverse.com/thing:4933932