「blender」カテゴリーアーカイブ

ゴミ箱用消臭、脱臭ホルダーの作成:Creating deodorant and deodorant holders for trash cans

ゴミ箱用消臭、脱臭ホルダーの作成:Creating deodorant and deodorant holders for trash cans

昨年から考えてようやく考えとコストが見えてきたので作成。

用意するもの
重曹クリーナー(粉)
ダイソーだと500gの物を用意したっす。
I created it because I finally saw the idea and cost after thinking from last year.

What to prepare
Baking soda cleaner (powder)
For Daiso, I prepared a 500g item.

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

【キッチン用洗剤】重曹(じゅうそう) 300g入り
価格:132円(税込、送料別) (2021/7/19時点)

 

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

カネヨ石鹸/粉末 重曹ちゃんSP500g
価格:182円(税込、送料別) (2021/7/19時点)

 

ヤジガラ炭
ゲル状で無い物

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

GEX 高級活性炭 即効性ろ過材 関東当日便
価格:185円(税込、送料別) (2021/7/19時点)

 

お茶パック

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

大和物産 漉し袋 使い捨て スパイスクラブ お茶パック M 60枚入
価格:96円(税込、送料別) (2021/7/19時点)

 

ヤシガラと重曹を密閉する容器と石灰乾燥剤(海苔になどについてくる)

すべて百均で揃えました。
まず、これからは室温と湿度が上がるのでゴミ箱から異臭がする可能性があるっす。
水分が切れてなかったとか、そこで昨年
ヤシガラ炭で
IMG_5327
このように、つけて臭いと交換期間を調べてみた。
続きを読む ゴミ箱用消臭、脱臭ホルダーの作成:Creating deodorant and deodorant holders for trash cans

キッチンペーパホルダーの作成:Creating a kitchen paper holder

キッチンペーパホルダーの作成

料理をするうえで、キッチンペーパーロールだと、作業中に切り取るのは結構難しい。
妻が、キッチンペーパを買うてきた
しかし、これまた不安定なのだ、そこでだ
壁面に装着できるように考えた

そこで、キッチンペーパーが安くなってきたのでこれを使うようになる。

Creating a kitchen paper holder

When cooking, it is quite difficult to cut out during work with a kitchen paper roll.
Her wife bought kitchen paper
But this is also unstable, there
She thought it could be mounted on the wall

Therefore, kitchen paper is getting cheaper, so I will use it.

 

 

 

これが、百均で購入
普通のプラケースだとその重み、形状が変わらないので
意味が無い、用途が違う。
これだと、枚数に合わせて可変可能!
This is a 100-yen shop
If it is an ordinary plastic case, its weight and shape will not change.
It’s meaningless, it’s used differently.
With this, it can be changed according to the number of sheets!
IMG_5313

IMG_5314

IMG_5315

このゴムの同様な物を被せれば
その形状は変化するので使いやすさと重さの良い
If you cover it with something similar to this rubber
Its shape changes, so it is easy to use and heavy.
IMG_5316

壁面には、これを張り付けるだけ
Just stick this on the wall
SnapCrab_NoName_2021-7-18_21-15-44_No-00

SnapCrab_NoName_2021-7-18_21-16-57_No-00

Kitchen paper holderのSTL
Kitchen paper holder STL
https://www.thingiverse.com/thing:4911475

完成!
少々大きく、頑丈に作りすぎたかな?
背面は、マジックテープなので後ろがしっかりしていないと
利用しにくいのでこの程度が無難かな?
とりあえず出来た!
Complete!
Was it a little big and made too sturdy?
The back is velcro, so if the back is not solid
Is this level safe because it is difficult to use?
I was able to do it for the time being!
IMG_5317

IMG_5318

IMG_5319
大きいかなと思ったけど
200枚ほどのクッキングペーパにはちょうど良かったかも
I thought it was big
Maybe it was just right for about 200 cooking papers
IMG_5334

Meshlab:点群からのメッシュを何とか滑らかにしたい!Meshlab: I want to somehow smooth the mesh from the point cloud!

CloudCompare
で点群レーザのデータを、ジオラマ作成で何とかスムーズにして
3Dプリンタのデータとしたい
SnapCrab_NoName_2021-7-6_21-2-44_No-00

Meshlab
を使うのが一番効果的でした。
Filters>Smoothing,Fairing and Deformation >
Laplacian Smooth を選択
SnapCrab_NoName_2021-7-6_21-12-54_No-00

数値は、10でほぼスムーズに
SnapCrab_NoName_2021-7-6_21-16-3_No-00