壁面設置タイプキッチンペーパホルダーの作成
料理をするうえで、キッチンペーパーロールだと、作業中に切り取るのは結構難しい。
妻が、キッチンペーパを買うてきた
しかし、これまた不安定なのだ、そこでだ
壁面に装着できるように考えたの改良版
考えてみれば、百均のケースちょっと大きすぎでスペースを考慮しなければならない。
ん?
百均のケース要らなくね?
そこでメッシュタイプのキッチンペーパホルダーと壁面キッチンペーパホルダー
を合わせて見た!
そこで、キッチンペーパーが安くなってきたのでこれを使うようになる。

Creating a wall-mounted kitchen paper holder
When cooking, it is quite difficult to cut out during work with a kitchen paper roll.
Her wife bought kitchen paper
But this is also unstable, there
An improved version designed to be mounted on the wall
If you think about it, the 100-yen case is a little too big and you have to consider the space.
Yeah?
You don’t need a 100-yen case, right?
Therefore, mesh type kitchen paper holder and wall kitchen paper holder
I saw it together!
Therefore, kitchen paper is getting cheaper, so I will use it.
|
|
|
|
|
|
これがキッチンペーパ
This is kitchen paper

このように壁面に設置を想定。
壁面は、ボックスの荷重を考慮して大きさは変化させていない。
Assuming installation on the wall in this way.
The size of the wall surface is not changed in consideration of the load of the box.

Wall kitchen paper holder
stl
https://www.thingiverse.com/thing:4917980
しかしだ、通常ある壁面に干渉するので、
何ならスリムタイプにした。
However, because it usually interferes with a certain wall surface,
I made it a slim type.




Wall kitchen paper holder slim
stl
https://www.thingiverse.com/thing:4917987
今度は、少し薄くしすぎたかも
(´・ω・`)>
直方向なら倒れないが、急いで取り出したり、そもそも医療用手袋等だと、方向が違うと設置した状況を維持できない可能性があるので
荷重と印刷効率、設置スペースを考慮してみた。
This time, maybe it was a little too thin
(´ ・ ω ・ `)>
It will not fall in the direct direction, but if you take it out in a hurry or if you use medical gloves in the first place, you may not be able to maintain the installed condition if the direction is different.
I considered the load, printing efficiency, and installation space.




Wall kitchen paper holder slim2
stl
https://www.thingiverse.com/thing:4917996