「3dプリンター」タグアーカイブ

Ender-3d:Ender-3d Prox オフィシャルから到着

チャットで確認し、ようやく到着
貧乏なので直接購入がまずかった
アマゾンから購入とあまり変わらない。
(^^>
何事も経験
SnapCrab_NoName_2019-12-28_9-17-9_No-00

Confirmed by chat, finally arrived
Direct purchase was poor because it was poor
It is not much different from purchase from Amazon.
(^^>
Experience everything

購入は12/14日
発送は、12/24
到着が、12/26
早すぎ!
IMG_3153
Purchase 12/14 days
Shipping is 12/24
Arrival 12/26
Too early!

とりあえず忘年会へ行って
実直に直帰り
早速
中身を空けると
リフト調整ネジ?
がすべて外れていた!汗!
組み上げると
えー!
IMG_3155
For the time being, go to the year-end party
Go straight back
immediately
When emptying
Lift adjustment screw?
Were all out! Sweat!
When assembled
Well!

バネが無し
IMG_3154
No spring

早速クレーム
とりあえず、いろいろゴソゴソして代用となるものを装着
このばねは絶対必要!
初めから、印刷したまマニュアルは付いてくる
組み立てには、最近はやりの3Dモデルタイプのマニュアルわかりやすい
マニュアル
SnapCrab_NoName_2019-12-28_9-31-40_No-00
Immediately claim
For the time being, I will attach various substitutes
This spring is a must!
From the beginning, a printed manual comes with it
For assembly, recently a manual of 3D model type of spear is easy to understand
manual

このバージョンなので自分だけの記録です。
組み上げるパーツの数々
SnapCrab_NoName_2019-12-28_9-30-39_No-00
This is my own record because it is this version.
Numerous parts to assemble

組み上げるパーツの数々
SnapCrab_NoName_2019-12-28_9-31-6_No-00
Numerous parts to assemble

※版権ごめんなさい!
ネジは、余分についているので助かります。
工具はすべてついているので気にする必要はありません。
テスト用のフィラメントはあり、3mほどかな?
別途
* I’m sorry for the copyright!
The screw is extra, so it helps.
You don’t need to worry because all the tools are on.
Is there a filament for test, about 3m?
Separately

これを購入
Buy this

組み立てまで12ページ
SnapCrab_NoName_2019-12-28_9-40-42_No-00
12 pages to assembly

Blender:差分、統合、交差を行ってみる。

モディファイアのブーリアン・モディファイアを使う場合、それを設定して、ブーリアンのモードを「差分」、「統合」、「交差」
から選択くるそうな。

おっと丁度3Dプリンターが香港から到着!
発送先も頑張りました。
なんと、発送から到着まで3日! ありえん!
SnapCrab_NoName_2019-12-27_16-13-2_No-00
If you use a modifier boolean modifier, set it and change the boolean mode to “Diff”, “Merge”, “Cross”
It seems to come from

Oops, a 3D printer has just arrived from Hong Kong!
The shipping destination also worked hard.
How, three days from shipment to arrival! There is!

ここにない場合は、アドインで導入する。
SnapCrab_NoName_2019-12-27_16-12-43_No-00
If not here, introduce it with add-in.

こんな感じ!
Like this!

んーヤバイ、とりあえず忘年会に行くか
I ’m going to go to the year-end party for now

Blender:レンダーデバイスの変更

実機は、古いがそこそこ使える。
gtx460が動作しないために、gtx650のとりあえず動作するビデオカードを導入
3dxmaxでは心持たないが、blenderは使える。
クラッシュも今は無し。
そこでレンダーデバイスの変更できるかさがした。
あった
SnapCrab_NoName_2019-12-27_15-34-5_No-00
The actual machine is old but can be used.
Since gtx460 does not work, introduce a video card that works for the time being gtx650
3dxmax doesn’t care, but you can use blender.
No crash right now.
So I asked if I could change the render device.
there were

とりあえずデフォルトでも問題なく使える。
For now, it can be used without any problems by default.